Help Fix Samsung Picture Message Error Setup Error
Over the past few days, a number of users have reported a Samsung picture message customization error.
Updated: ASR Pro
Why won’t my Samsung receive picture messages?
Note. To send or receive multimedia messages (MMS) on a Samsung smartphone, a data connection is required. Go to Settings > Applications > Messages > Settings > Advanced settings > Multimedia messages > Automatic recovery. Then try sending you a larger picture message to see if we can already send you an MMS as a receipt.
FDA Health Guidelines Update: Gambro Prisma® Continuous Renal Replacement System
- After operational problems with the Prisma® system and,
- All user installations must complete Gambro’s ongoing product training by March 1, 2006.
Since the release of our Interim Public Health Statement in August 2005, the FDA has become aware of additional serious injuries and deaths associated with the use of the Gambro Prisma® Applicator for Continuous Renal Replacement Therapy (CRRT). Prisma® CRRT is a broad spectrum renal dialysis system used in all majorin intensive care units and ancillary facilities for critically ill patients.
We would like to reiterate that a special warning should be used when using our Prisma® system to avoid excessive emptying of patients. Caregivers must strictly follow established operating procedures, including the manufacturer’s instructions for use, the manual, and the Prisma® system user interface, to maintain control of the control panel.
Why won’t picture messages download on my Samsung?
Clear cache and data Sometimes the cache files usually get corrupted which causes Android MMS to load all the time. To resolve this issue, you need to clear the cache and messaging package data. Go to Settings > Apps to tap on your email program. Click “Storage” and you will be prompted to see two options: “Clear Researcheating” and “Clear cache”.
Caregivers should pay close attention to any false weight warnings we have found. These alerts were designed to alert certain users to a possible water imbalance that occurred during the CRRT program. If treated without addressing the cause of the alarms, the patient may lose too much fluid, which could result in serious injury or death.
Device design issues can also be the cause of the problem, and the FDA and the company are currentlyfollow her.
- If you encounter an “Incorrect Weight Change Detected” discharge (outflow weight, replacement weight, or dialysate weight), the media channels MUST NOT “CONTINUE” without first determining and correcting the cause of each alarm. Possible causes are listed in the Prisma user manual and in our latest online notice (click here). Note that the device does not provide the user with any confirmation that a particular issue has been resolved.
- Once the alarm has been proven to have worked and the problem has been resolved, you can continue to monitor the patient’s fluid balance in depth during treatment to ensure the problem has been resolved.
- Please note that the excess amount of substance removed may increase during dual alarms, and this problem also occurs when the fluid flow rate is set to 0 cm3/h.
- Please note that the amount of fruit juice removed (displayed on the Prisma® system monitor) may not be accurate. In particular, displayThe displayed value of the current “amount of liquid removed” may differ from the indicated value by ±60 cm3/h.
- If you are receiving other “False Change Detected” weight alerts and the cause cannot be determined, you should resolve the issue first and then stop and restart treatment if necessary.
Why are my picture messages not being received?
Check your Android phone’s network connection if you can’t send or receive MMS messages. An active mobile data connection is required to use the MMS feature. Open your phone settings and the usual “Wireless & Network Settings”. Tap Mobile Networks to confirm it’s turned on.
Finally, to eliminate the possibility of more injury or death, to ensure that users are properly trained in the use of computer equipment, and to highlight the need for user awareness, Gambro will provide ongoing training at all PC operator sites. This training must be completed by March 1, 2006. The company also draws the attention of all medical institutions to the issue of unnecessary disposal of liquids. Training may take place in one of our own medical facilities where Prisma® systems are located. This training can focus on dealing with “Incorrect weight change detected” alarms and will provide users with ways to resolve the alarms to avoidand serious health consequences due to excessive fluid intake. Renal Gambro Products will contact all institutions directly; Clinics that have a Prisma® device and have not received training information from Gambro should contact Gambro directly. All relevant employees must be informed and invited to attend upcoming training courses at all times. To protect against potentially serious health consequences, this method is essential for all users and recipients of the Prisma® system to understand this program. Completion of such training should be seriously documented by the dialysis staff. In the future, Renal Gambro Products, Inc. may make changes to the Prisma® system to address this issue. We will provide crisis updates as needed to keep you informed of the situation.
The Prisma® System is used for the continuous sampling and/or disposal of dissolved fruit juices in patients with severe renal impairment or fluid overload. Approximately 5,000 units have been distributed to hospitalsworldwide, including 1900 systems in the United States. This device causes or contributes to many of the serious adverse events associated with canine or feline odor of excess fluid in CRRT patients. To date, we are aware of 9 deaths and 11 serious injuries, all of which are related to the problem of excessive fluid removal. A particular problem may arise when the causes of one or more “Incorrect Weight Change Detected” alarms are not properly compensated for before further processing. The problem can also be exacerbated by our own device software and user program.
August 16, 2005 Gambro Renal Products, Inc. issued an Adjustment Authorization and sent out to all users of this Prisma® system a “Global Safety Alert” explaining the immediate action to be taken to eliminate potential risks associated with the device. In accordance with the Field Safety Notice dated August 16. Gambro also provided its customers with:Download this software now to improve your computer's performance.